>How To Unbrick Or Restore Nook Color To Factory Default Using ADB

>

You can easily restore or unbrick your Nook Color to its original factory default state in case you tried to flash or install something on it that went wrong. This will let you start fresh with the device the way it was before you attempted to install that fancy custom ROM you wanted on your device. Read on for our complete guide.
Requirements:
Procedure:
  • Download the above Boot and System Images.
  • Unzip and extract to the root of your SD card.
  • Plug your Nook color into your PC using USB Interface.
  • Go to your Android SDK Folder and run ADB as instructed in the above tutorial.
  • Go to ADB Shell and type the below mentioned commands
    dd if=/sdcard/boot.img of=/dev/block/mmcblk0p1
    dd if=/sdcard/system.img of=/dev/block/mmcblk0p5
  • This will restore :
    • Nook Color’s Boot Image
    • Nook Color’s System Image
    • Nook Color’s Original Parition Structure
  • Type ‘adb reboot’ to reboot your Nook Color into original factory state.
Congratulations! Your Nook Color is now restored to its original condition & settings.
This method can also be used to unbrick your Nook Color incase of any issue during normal usage or flashing of any custom Android ROMs available such as the Honeycomb and Froyo builds everyone has been talking about.
Thanks to XDA-Developers forum member shad0wf0x for sharing this method as well as the stock images with us.
[VIA XDA DEVELOPERS]
About these ads

About nonerox

Btech Student
This entry was posted in Android, Nook color. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s