>How to Unbrick / Restore ViewSonic G-Tablet

>

If you have ended up bricking your Viewsonic G Tablet while attempting to install a custom ROM or kernel to it and are now afraid you’ll never be able to use it again, fear not as we have you covered with a way to unbrick your Android tablet and restore it to its factory default state with a rather simple method.
Sometimes during heavy customization a device becomes unusable due to some firmware error or for the most part human error. In case of a Viewsonic G Tablet, we’re here with the solution that should work for most bricking cases. With this method, you should have your tablet back in its factory default condition.

Prerequisites:

Procedures:

  1. Download the above mentioned restore file.
  2. Insert the SD card into the card reader and access it using your computer.
  3. If the SD card has any important data, save it to the computer.
  4. Format the SD card.
  5. Unzip the downloaded file and extract the ‘Recovery’ folder and ‘update.zip’ file to the root of your SD card.
  6. Power off your device.
  7. Press and hold the Volume Up button, then press and hold the Power button. You should see the ViewSonic boot image logo and the text ‘Detected Recovery Image’ on your tablet’s screen.
  8. Let the installation take place automatically. The device will reboot after completion.
Congratulations! Your ViewSonic G-tablet is now restored to original firmware condition!
[VIA DROIDPIRATE]
Advertisements

About nonerox

Btech Student
This entry was posted in Android, ViewSonic G-Tablet. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s